THESE OPTIONS CAN GREATLY EXPAND THE NUMBER OF SIGNALS TO BE MEASURED OR SIMULATED.  SOME ARE ADDED DIRECTLY TO THE INSTRUMENT WHILE OTHERS ARE SUPPLIED BY PLUG IN'S CALLED MULTISOURCE MODULES.

OPTION J-K
    PROVIDES THE ADDITIONAL CAPABILITY FOR TTU3C OR 4C OF SIMULATING AND READING TYPE J AS WELL AS TYPE K THERMOCOUPLES.  CONTROLLED BY A CONTROL PANEL SWITCH.

OPTION VIB
    ALLOWS ONE SPEED CHANNEL TO BE USED TO SIMULATE SIGNALS FROM VIBRATION SENSORS.  GENERATES SIGNALS OF 0 TO 1 VRMS FROM 100 TO 600 HZ.

MULTISOURCE MODULES

MULTISOURCE MODULES ARE SEPARATE DEVICES THAT PLUG TO TTU3C AND 4C POWER SUPPLIES AND GENERATE ADDITIONAL SIGNALS.  AN EXAMPLE OF A MULTISOURCE MODULE CAN BE SEEN IN THE PICTURE ON THE  SIMUTESTERS PAGE .

MODEL MS3
    PROVIDES TWO ADDITIONAL MILLIVILT SOURCES AND ONE VOLTAGE SOURCE.  ALL SOURCES ARE AVIALABLE SIMULTANEIOSLY AND ARE ELECTRICALLY ISOLATED FROM EACH OTHER AND FROM ALL OTHER SOURCES.

MODEL MS4C
    PROVIDES ONE MORE SPEED OUTPUT CHANNEL IDENTICAL TO THE SPEED OUTPUTS ON THE TTU3C AND 4C.

MODEL MS6
    PROVIDES THE CAPABILITY TO SIMULATE THE SIGNAL FROM THE CURRRENT TRANSFORMER AND THE SIGNAL FROM THE PHASE TRANSFORMER, NORMALLY USED IN COMBINATION TO INDICATE GENERATED ELECTRICAL POWER.

MODEL MS8
    PROVIDES THE CAPABILITY TO ACCURATELY MEASURE PRESSURE TO 1,000 PSIG.  NORMALLY USED TO CALIBRATE PRESSURE TRANSMITTERS.

MODEL MS9
    RTD SIMULATOR.  PROVIDES VARIABLE RESISTANCE TO SIMULATE RTD'S.  PLUGS INTO BUILT IN DIGITAL MULTIMETER.